Tag Archives: DIY

How to Change Your Rims DIY Style

Rims can be pretty expensive which is why many individuals with enough strength and know how choose to buy rims and install them DIY style. While this might be able to save you a penny or two in terms of mechanic services, it can also cause you a whole world of trouble and potential injury. Before you start your rim changing project, make sure you understand exactly what you need and what you have to do to get the job done properly and safely.

What You Need When Changing Rims

See to it that you have the following items in handy before you start changing your rims:

  • Car Jack
  • Socket set
  • Tire lever

If you don’t have these items, you can borrow them from a friend or neighbour. But if you think you’ll need them in the future, they can become a worthy investment. Auto supply stores and hardware shops often have these items available. See to it that you get a sturdy model that will serve you well for years to come.

How to Change Your Car Rims

  1. Lift the Car – You can’t expect to be able to replace the wheels if the entire car’s weight is still resting on it. Using your car jack, lift the wheel off of the ground and ensure that the proper locks are in place. The last thing you want is the car falling on you while you’re doing the job.
  1. Deflate the Tire – When tires are fully inflated, they tend to latch on to wheels to be able to secure the air inside. It’s impossible to wiggle a tire off a wheel when it’s fully inflated. Deflate the tire first to create a space between it and the wheel.
  1. Remove the Bolts – Using your socket set, remove the bolts that secure your rim to the car. Remember which bolt corresponds to which hole as these sometime become difficult to reinstall when they’re not appropriately paired. Once the wheel is free from any fasteners, carry it off of the car and gently place it on the ground. Do not place it vertically upright and instead lay it down on a piece of cloth. Have someone help you in case it’s too heavy.
  1. Remove the Tire – Take your tire lever and slip it in between the tire and the wheel. Push out and pry the tire off of the wheel. Repeat this around the circumference of the tire until it pops out of place.
  1. Place the Tire Around the New Replica Rim – Pop the new rim into place around the lips of the tire and secure the new combination onto your car. Secure each rim bolt with your socket set and gently lower the car back on the ground. Repeat the procedure for all other wheels to complete the project.

Guest post provided by certified auto expert Cito Williamson. For more information about cheap rims, visit his site replica rims and tell them we referred you for a 5% discount.